92 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONFIG. / NETWORK SERVICE
4. Setup Port Mapping Parameters
Preparation
Procedure
Step 2 Click the buon on to enable Port Mapping.
Step 3 Set the parameters according to Table 9-3.
Step 1 Choose Network Service > Port Mapping.
The Port Mapping page is displayed, as shown in Figure 9-4.
Figure 9-4 Port Mapping page
With port forwarding can setup the connecon between privacy network and public network. Enable the port
forwarding to access the privacy network devices from public network.
To Next Page
Loading...
Need help?
General
