72 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
10. Illegal Parking
CONFIG. /INTELLIGENT ANALYSIS
Function Definition
Function Settings
Figure 6-28 Illegal Parking Interface
Step 1 Select Conguraon > Intelligent Analysis > Illegal Parking to access the Illegal Parking seng interface,
as shown in Figure 6-28.
Illegal parking allows seng the dwelling me criteria for a target within the deployment area on the video
screen. When the dwelling me of a target of specied type (vehicle) within this area meets the set allowed
parking me, an alarm is generated.
Step 2 Set all parameters for the Loiter. Table 6-10 describes the specic parameters.
To Next Page
Loading...
Need help?
General
