96 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONFIG. / NETWORK SERVICE
6. Setup FTP Parameters
Description
Procedure
Step 1 Choose Network Service > FTP.
The FTP page is displayed, as shown in Figure 9-6.
Figure 7-6 FTP page
If the File Transfer Protocol (FTP) buon is enabled, the device automacally sends the snapped alarm JPG
images to specied FTP server.
Step 2 Click the buon on to enable FTP.
Step 3 Set the parameters according to Table 9-5.
To Next Page
Loading...
Need help?
General
