6 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
1. Login and Logout
Login
Logout
QUICK REFERENCE GUIDE
CAUTION
We recommend to use Internet Explorer 7 or latest version to access the ViewZ web management system.
Firefox will work with ViewZ web management system, but some funcon and layout might not work
perfectly.
Windows Edge and Chrome are currently not supported by ViewZ web management system.
Step 1 Open Internet Explorer. Enter the IP address of the PVM IP camera (default value:
192.168.0.120) in the address box and then press Enter.
The login page is displayed, as shown in Figure 1-1.
Factory Default IP address : 192.168.0.120
Factory Default Subnet Mask : 255.255.255.0
Factory Default Gateway : 192.168.0.1
Factory Default DNS 1 : 192.168.0.1
Factory Default DNS 2 : 192.168.0.2
Cauon: IP address and gateway address should be set with the
same IP parameters. For example, if IP address is "A.B.C.0 ~
255", then gateway address should be set as "A.B.C.0~255"
(however, IP and gateway address cannot be the same.)
Note
• The default user name is admin and the default password is admin. Change the password when you log in
to the system for the rst me to ensure system security.
• You can change the system display language on the login page.
To log out of the system, click the icon in the upper right corner of the main page.
The login page is displayed aer you log out of the system.
Step 2 Enter the user name, and password
Step 3 Click Login. The main page will be displayed.
Figure 1-1 Login Page
To Next Page
Loading...
Need help?
General
