40 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
2. Single Virtual Fence
CONFIG. /INTELLIGENT ANALYSIS
Function Definition
Function Settings
Figure 6-4 Single Virtual Fence Setting Interface
Step 1 Select Conguraon > Intelligent Analysis > Single Virtual Fence to access the Single Virtual Fence
seng interface, as shown in Figure 6-4
A single virtual fence is a line that is set at a concerned posion within the monitored eld of view and
species the forbidden travel direcon. An alarm is generated when the specied types of targets (such as
human or vehicle) cross this line.
Step 2 Set all parameters for the single virtual fence. Table 6-2 describes the specic parameters.
To Next Page
Loading...
Need help?
General
