36 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONFIG. /INTELLIGENT ANALYSIS
1. Perimeter
Description
Settings
The perimeter funcon refers the alarm that is generated when the targets of specied types (such as human,
vehicle and both) enter the deployment area.
Step 1 Select Conguraon > Intelligent Analysis > Perimeter to access the Perimeter interface, as shown in
Figure 6-1
Step 2 Set all parameters for perimeter. Table 6-1 describes the specic parameters
Figure 6-1 Perimeter Setting Interface
To Next Page
Loading...
Need help?
General
