ViewZ VZ-IP-PVM-N Series User Manual

64 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
8. Abnormal Speed
CONFIG. /INTELLIGENT ANALYSIS
Function Definition
Function Settings
Figure 6-22 Abnormal Speed Interface
Step 1 Select Conguraon > Intelligent Analysis > Abnormal Speed to access the Abnormal Speed seng
interface, as shown in Figure 6-22.
Abnormal speed allows seng the travel speed criteria for a target within the deployment area on the video
screen. When the travel speed of a target of specied type (such as human or vehicle) within this area meets
the alarm condion, an alarm is generated.
Step 2 Set all parameters for the Loiter. Table 6-8 describes the specic parameters.

ViewZ VZ-IP-PVM-N Series Specifications

General

Brand	ViewZ
Model	VZ-IP-PVM-N Series
Category	Monitor
Language	English