ViewZ VZ-IP-PVM-N Series User Manual

91User Manual Visit the ViewZ USA website at https://www.viewzusa.com
3. Setup PPPoE Parameters
CONFIG. / NETWORK SERVICE
Procedure
Step 3 Click Apply.
• The message "Apply success!" is displayed. Click Conrm. The system saves the sengs.
• If other informaon is displayed, set the parameters correctly.
Table 9-2 PPPoE parameters
PPPoE
Account
Password
IP Address
Click the button ON.
Enter a value manually.
Enter a value manually.
[Setting method]
[Default Value] OFF
[Setting method]
[Setting method]
Indicates whether to enable the PPPoE service.
PPPoE user name provided by the network carrier.
Password provided by the network carrier.
The parameter is automatically filled by network.
SengParameter DESCRIPTION
[Default Value] Blank
[Default Value] Blank

ViewZ VZ-IP-PVM-N Series Specifications

General

Brand	ViewZ
Model	VZ-IP-PVM-N Series
Category	Monitor
Language	English