ViewZ VZ-IP-PVM-N Series User Manual

84 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONFIGURATION / ALARM
3. Setup Motion Detection Alarm Parameters
Procedure
Step 7 Turn on the SMTP noce. If you turn on, system will send an email about moon detecon alarm.
Step 8 Congure the detecon area.
Press and hold the le mouse buon, and drag in the video area to draw a detecon area.
Step 9 Click Apply.
The message "Apply success!" is displayed.
Step 10 Click Conrm.
The system saves the sengs.
Figure 7-4 Motion Area Setting page - Setup motion detection area
Note
• Click Clear to delete a detecon area.
• Click Reverse to select the area out of specied frames as the detecon area.
Click
Click & Drag

ViewZ VZ-IP-PVM-N Series Specifications

General

Brand	ViewZ
Model	VZ-IP-PVM-N Series
Category	Monitor
Language	English