ViewZ VZ-IP-PVM-N Series User Manual

20 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
CONFIGURATION / STREAM
2. Setup ROI Parameters
Procedure
Step 2 Set ROI parameters as below in Table 4-2.
Stream
Area ID
Level
Area Name
SengParameter DESCRIPTION
Table 4-2 ROI configuration parameters
Enable
[Default value] OFF
[Default value] Stream 1
[Default value] 1
[Default value] 5
should be less than 32 Bytes
[Setting method] Click to ON/OFF
[Setting method] Pull-down and select
[Setting method] Pull-down and select
[Setting method] Pull-down and select
[Setting method] Name length
Enable ROI function
clearer the image within the ROI area and
blurrier the image outside the ROI area.
Stream name
ROI Area ID number
Refers to ROI Area image quality. Higher the level,
User can name the Area ID with special name

ViewZ VZ-IP-PVM-N Series Specifications

General

Brand	ViewZ
Model	VZ-IP-PVM-N Series
Category	Monitor
Language	English