18
Tab 5S UP - 40515
IT
3.1.6 Zoom function
By touching the screen again (in an area where there are no controls), the display returns to the no-controls mode.
By touching the screen twice, the zoom area selection screen appears.
During a call it is possible to use the “Zoom” function.
The interface shows a graphic track over the video stream divided into ve areas, to allow the user to select the portion
to zoom into.
Click on one of the areas to zoom in on it. After 4 seconds, the display returns to the previous view.
Touch the screen twice to return to the screen with the “Zoom” function, touch once to disable the controls.