54
Tab 5S UP - 40515
IT
If the alert sending has failed or there are sending problems, the text label will change to “Sending failed” and the button
will show an error signal.
The alert icon in the state bar will be red.
After 3 seconds, the button will return to normal state and it will be possible to send a new alert.
If the alert message is sent successfully and the alert is correctly managed by the switchboard, this will be reported by
the text label, which will change to “Managed”, and the button will change accordingly. The alert icon in the state bar
will be green.
After 3 seconds, the button will return to normal state and it will be possible to send a new alert.
If the alert message is sent successfully but the alert is not correctly managed by the switchboard, this will be reported
by the text label, which will change to “Not managed”, and the button will change accordingly. The alert icon in the state
bar will be red.
After 3 seconds, the button will return to normal state and it will be possible to send a new alert.