81
Tab 5S UP - 40515
IT
and the end result.
In these cases, the system will warn of the fact that the intervals and merged in a pop-up.
The user can accept the action, described in a graphic diagram, or return to the change.
Proceeding to merge two overlapping intervals, the user will obtain a new time band with start and end values calculated
by the operation.
If six intervals are congured, the diagram will be shown complete, and the add control is no longer available.
The help control on the left in this case shows two dierent controls, fading alternately every 3 seconds.
The messages displayed are: “click on an interval to change it, press and hold down to delete it”, “maximum number
of congurable intervals”.
The day graph will then be updated with the edited programming
By activating the “Group” option, the days with similar programming are shown as a group and changes can be made
as seen for single days, but aecting all the elements contained in the group at the same time.
The navigation bar at the bottom of the screen shows the days, highlighting the selected ones in yellow, in this case
for all the days in the group.
You can move between days or groups without returning to the previous screen, by selecting the element you wish to
To Next Page
Loading...
