VM Motori MR 700 - Page 73

MR 700
11
Ed. 3 - 2012_11
English
STANDARD COMPONENTS
SPECIFICATIONS
The following accessories are supplied with the engine
1) Oil change pump
2) Control board
3) Extension cable connecting control board/engine wiring
These technical data and specications refer exclusively to standard VM MOTORI
S.P.A. engines.
MR704 MR706
DIMENSIONS
A mm 705 929
B mm 758 758
C mm 786 788
GENERAL DATA
Cycle Four stroke Diesel
Total displacement litres 2,776 4,164
No. of cylinders n. 4 6
Bore and stroke mm 94x100 94x100
Compression ratio 17,5:1 17,5:1
Induction type Turbocharged and inter-cooled circuit - (Dry) air lter
Cooling Water circuit
Cooler water/water
Crankshaft rotation
Anticlockwise (observing the engine from the hand-
wheel side)
Combustion sequence 1-3-4-2 1-5-3-6-2-4