MR 700
25
Ed. 3 - 2012_11
English
INSTALLATION DESIGN
In order to ensure the highest perfor-
mance while protecting people, the
product itself and the environment, a
full project has to be developed before
carrying out the installation.
The design phase should take into
account the technical data of the engine
(see”Technical data”) and all the risks
which may occur during its expected
lifetime, from installation to disposal.
During the design and installation
phase, it is a good idea to consult the
installation manual drawn up by VM
MOTORI S.P.A. as this contains the
installation guidelines.
Further information are available in the
website: www.vmmotori.it, in the “Con-
tacts – Request Info” section.
To Next Page
Loading...
