Volvo EPA2007 D13F - Page 157

BASICSERVICE151
9.PerformthefollowingstepstoaligntheDPFmuferintonalpositiononthe
muferstanchion:
•Alignthemuferinletwiththeexhaustelbow.
•Alignthemuferuppersupportingbrackettothestanchionandinstallthebolts
loose.
•Looselyinstalltheuppersupportingbandclampwithattachedbracketandinstall
bracketboltsintothestanchion.
•Looselyinstallthelowersupportingbandclamp.
10.Withallcomponentsaligned,installandsecurethelowerV-bandclampatthe
inletsideofthemufer.
11.InstalltheheatshieldontotheDPFmufer.
12.SecureallfastenersandclampsthatconnecttheDPFmufertothestanchion.
Tightenallclampsandmuferfastenersaccordingtospecication.
13.Disconnecttheliftingdeviceandremovetheliftingchainfromthemufer.
14.Reconnecttheharnessconnectorsforalltemperatureandpressuredifferential
sensorsontheDPFmufer.
15.LocatetorquespecicationsfortheV-bandclampscrews,linesandsensorsinthe
SPECIFICATIONSsectionofthismanual.
16.UsingthePremiumTechTool,(PTT)ensureallsoottriggerlevelsarereset
backtozero.