VOO evasion - Remote Control Pairing

13
LED
1.4 Remote control
Pairing the remote control with the .évasion box
The remote control is connected to your box via radio signal. This connection is
established automatically during installation.
To manually pair the remote control and the box, follow these steps:
1
Simultaneously press the red button and the ‘be tv’ button for 3 seconds.
The LED on the remote control ashes 3 times.
2
Press consecutively on ‘VOL-’, ’STOP’, ‘VOL+’.
3
Press the remote pairing button on the back of the box (‘remote pairing’).
4
Press ‘ok’ on the remote control. The LED on the remote control ashes 3 times
toconrm the association.
1
2
4
3