VOO evasion - Media Center; Hard Drive

42
primary video output According to the connections in place, the box sets the default
output. This can be changed to the following:
- automatic
- HDMI
- Scart
- composite
3D mode Makes it possible to enable or disable the automatic switching
to3D mode of your television.
When the ‘automatic’ mode is on, if your television is 3D
compatible, it will switch to 3D mode automatically when you
switch to a programme broadcast in 3D.
You also have the option of manually switching to 3D mode
orcompletely disabling this mode.
SCART signal type To select the type of signal from the SCART output of your box.
The ‘RGB + CVBS’ mode (default) ensures better image quality.
You also have the option of choosing ‘composite’ mode.
Media center
Viewing your personal content on your box can be enabled or disabled.
By disabling it, you will no longer see the contents of your media center in your
‘library’menu.
Hard drive
managing
disk space
When the automatic management of disk space is activated, your box
will automatically delete the oldest recordings to free up space for new
recordings. This only happens when you do not have space available on
your hard drive for a new recording.
If you choose manual management, when no disk space is available,
you will have to manually delete recorded programmes to enable
anewrecording.
You can protect some recordings from automatic deletion via the
‘actionmenu’ of your recordings.
p.19
occupied
disk space
The ‘occupied disk space’ menu gives you the utilisation rate of your
harddrive.
pairing the
hard drive with
thedecoder
Makes it possible to pair a new hard drive with your box or allows playback
of your old hard drive on your box. Follow step by step instructions to pair
your hard drive with your box.