VOO evasion - Box Diagnostics

43
ejecting thedrive To safely eject your drive.
Follow the steps on the screen before removing your drive from your box.
Never eject or insert a hard drive if your box is not electrically off.
formatting
your drive
Allows you to completely delete the contents of the hard drive of your box.
This procedure cannot be cancelled once started and your contents
will not be recovered. It is necessary to enter your parental code to start
theformatting process.
Standby
Your box is designed to respect the environment. The options of the ‘standby’ menu
allow you to adjust the level of power consumption.
hot standby Slight decrease in consumption compared to its consumption in ‘on’ mode.
Inthis case, your box comes back on very quickly.
cold standby To maximise energy gains. In this case, the reboot is the same as after
apower failure.
delay before
standby
Allows you to choose the period of inactivity before the auto standby.
Thisperiod may be 4, 5, 6, 7 or 8 hours. It may also be disabled.
Reset
This menu allows you to return to your box’s factory settings. You are prompted to keep
or delete your recordings during the reset.
For added security, access to this menu is protected by the parental code.
4.3 Diagnosis of the .évasion box
This menu allows you to access all the technical information of your box and your
network connection. This information is mostly useful for troubleshooting.
box diagnostics This menu shows you the technical information of your box and the strength
and quality of your signal.
network
diagnostics
This menu presents the technical information for your network connection.
access control This menu presents some technical information related to access control
ofyour box.
TV information This menu shows you some technical information on the television set
connected to your box.