VOO evasion - System Settings

39
Recommendation
Depending on your viewing habits, your box suggests selected content for you.
Thisdata is handled condentially. You can choose to disable customisation of
theserecommendations.
Brightness of the front panel of your .évasion box
You can adjust the brightness of the display on the front panel of your box.
There are 3levels of brightness:
- maximum (default)
- average
- minimum
4.2 System settings
Installation
network
connection
To guide you step by step through the installation of the Internet connection
to your box with either an Ethernet connection or with a WiFi connection.
If your network is already installed, this menu shows you the status of your
network connection.
installation diagrams: p.10, 11, 12
installation of
the services
Reserved for your installer to perform the rst installation of your box.
adding a remote
control
The remote control is connected to your box via radio signal.
This connection is established automatically during installation.
The connection by radio signal means that you do not have to aim at the
box with your remote control when you use it. This also allows you to keep
your box in a cupboard while allowing remote control operation.
p.13
Codes, controls and locks
You can set the parameters related to parental control and purchase code according
toyour criteria.
Access to the ‘locks and codes’ menu is protected by the parental code.