VOO evasion - Page 15

15
To pair your remote control to your television set:
1
Switch on the television.
2
Press and hold down simultaneously for 3 seconds the button ‘be tv’ and the
red button on your .évasion remote control. The red LED of the remote control
ashes 3 times and then stays on.
3
Press consecutively ‘VOL-’, ‘REC’ and ‘VOL+’. The red LED on your remote
control ashes 3 times and then stays on.
4
Enter the code for your brand of TV. If you do not know the code, enter ‘0000’
and the code search will take place automatically. The red LED of your remote
control will ash 3 times if the code is recognised.
5
Continually press the button to switch on or off your television until your television
turns off.
6
Press down for 3 seconds on the button to mute the sound.
The red LED on your remote control ashes 3 times and then stays on.
7
Press the box power button on your remote control.
Your remote control is now paired with your television.
8
Switch on your television set with the television on/off switch to check that your
remote control is connected to your television.
If the connection procedure did not work, please visit www.VOOassistance.be.
You can nd the codes for the major television brands in the annex.