WABECO D6000 - Safety Regulations for the Handling of Cooling Lubricant; Filling the Coolant System Integrated in the Safety Cabin; Operating the Coolant System with CNC Control; Positioning the Segmented Coolant Hose

168 pages

Save Page as PDF

To Next Page

To Previous Page

153

23. Safety cabin (optional)

23.2 Mounting of the safety cabin to the tool cabinet

(optional)

23.3 Safety regulations for the handling of cooling lubricant

See point 22.3

23.4 Filling the coolant system integrated in the safety cabin

See point 22.4

The capacity of the coolant system integrated in the safety cabin is approximately 36 litres.

23.5 Operating the coolant system with CNC control

See point 22.6

23.6 Positioning the segmented coolant hose

See point 22.7

23.7 Controlling the flow of coolant using the coolant shut-off valve

See point 22.8

Main Page

Default Chapter3
- Default Chapter3
  - Table of Contents3
- Declaration of Conformity for D6000 - D6000 Hs8
- Declaration of Conformity for D6000-C - D6000-C Hs9
- Declaration of Conformity for CC-D6000 - CC-D6000 Hs10
1 Important Safety Notes11
- Intended Use11
- Improper and Incorrect Use11
- Modifications to the Machine11
- Safety Regulations for Proper Use11
- Safety Features14
- Explanations of the Symbols15
2 Delivery and Set up15
- Transporting the Machine16
3 Putting into Operation17
- For All Lathes17
- For All CNC Lathes17
  - Setting up and Connecting the Control Computer17
4 Specifications Regarding the Machine18
- Identification of the Model18
- Noise Emission Declaration for D6000 - D6000 Hs18
- Noise Emission Declaration for D6000-C - D6000-C Hs24
- Noise Emission Declaration for CC-D6000 - CC-D6000 Hs30
- Revolution Selection36
- Diagram for Reading off the Revolutions36
- Revolution Changer for 1.4 Kw Motor37
- Revolution Changer for 2.0 Kw Motor38
- Electrical Equipment 1.4 Kw Motor39
- Electrical Equipment 2.0 Kw Motor39
- Achieving Optimum Results and Avoiding Incorrect Usage40
6 Thread Cutting and Automatic Feed42
- Thread Cutting42
- Tumbler Gear Drive43
- Use of Change Gears44
7 Maintenance46
8 Lubrication of the Machine47
9 Readjusting the Main Spindle48
10 Overload Coupling48
11 Readjustment of the Bearing Clearance of the Lead Screw49
12 Tool Skid - Transverse Skid50
13 Tool Skid - Longitudinal Skid52
14 Tailstock53
15 And 4 Jaw Lathe Chuck54
16 Operational Faults and the Elimination of such55
17 Operating Elements58
- D6000 Lathes with 1.4 Kw Motor with Trapezoidal-Threaded Spindle58
- D6000 Lathes with 2.0 Kw Motor with Trapezoidal-Threaded Spindle59
- D6000 Lathes with 1.4 Kw Motor with Ball Screw Spindle60
- D6000 Lathes with 2.0 Kw Motor with Ball Screw Spindle61
- D6000-C Lathes with 1.4 Kw Motor with Trapezoidal-Threaded Spindle62
- D6000-C Lathes with 2.0 Kw Motor with Trapezoidal-Threaded Spindle63
- D6000-C Lathes with 1.4 Kw Motor with Ball Screw Spindle64
- D6000-C Lathes with 2.0 Kw Motor with Ball Screw Spindle65
- Switch Cover on CNC Operating Console66
  - For CC-D6000 Lathes with 1.4 Kw Motor66
- Switch Cover on CNC Operating Console67
  - For CC-D6000 Lathes with 2.0 Kw Motor67
- CC-D6000 Lathes with 1.4 Kw Motor with Trapezoidal-Threaded Spindle68
- CC-D6000 Lathes with 2.0 Kw Motor with Trapezoidal-Threaded Spindle69
- CC-D6000 Lathes with 1.4 Kw Motor with Ball Screw Spindle70
- CC-D6000 Lathes with 2.0 Kw Motor with Ball Screw Spindle71
18 Drawings and Legends72
- Electronic Console, 1.4 Kw Motor72
- Protective Hood, Drive 1.4 Kw Motor75
- Protective Hood, Drive 2.0 Kw Motor76
- Electronic Console, 2.0 Kw Motor78
- Headstock81
  - Headstock - Transmission with Trapezoidal-Threaded Spindle82
  - Headstock - Tumbler Gear with Trapezoidal-Threaded Spindle83
  - Headstock - Transmission with Ball Screw Spindle84
  - Headstock - Tumbler Gear with Ball Screw Spindle85
- Bed with Lead Screw with Trapezoidal-Threaded Spindle86
- Bed with Lead Screw with Ball Screw Spindle88
- Change Gear Quadrant for Trapezoidal-Threaded Spindle and Ball Screw Spindle92
- Tool Skid - Transverse Skid94
- Tool Skid - Lock Plate96
- Tool Skid - Longitudinal Skid98
- Transverse Skid with Lock Plate with Ball Screw Spindle100
- Tailstock102
- Motor for Control of the X-Axis104
- Motor for Control of the Z-Axis106
- Operating Console for 1.4 Kw Motor108
- Operating Console for 2.0 Kw Motor112
- Bracket Arm for Operating Console116
- Industrial Screen and Membrane Keyboard118
- Industrial Screen and Membrane Keyboard Specifically for 1.4 Kw Motor120
- Industrial Screen and Membrane Keyboard Specifically for 2.0 Kw Motor122
- Bracket Arm for Industrial Screen and Membrane Keyboard124
- Lead Screw Cover125
- CNC 8-Fold Tool Changer126
- Speed Sensor (Optional) for 2.0 Kw Motor with Safety Cabin128
  - For 1.4 Kw Motor with and Without Safety Cabin128
19 Circuit Diagram130
- For 1.4 Kw Motor130
- For 1.4 Kw Motor and Safety Cabin with Nccad Basic131
- For 1.4 Kw Motor and Safety Cabin with Nccad Professional132
- For 2.0 Kw Motor133
- For 2.0 Kw Motor and Safety Cabin with Nccad Basic135
- For 2.0 Kw Motor and Safety Cabin with Nccad Professional135
- Industrial Screen and Membrane Keyboard Specifically for 1.4 Kw Motor136
- Industrial Screen and Membrane Keyboard Specifically for 2.0 Kw Motor137
- Multiphase Motor with End Stop138
- Key for Circuit Diagram139
20 Camlock Main Spindle (Optional)141
- Undoing a Chuck or Holding Flange from the Camlock141
- Blocking a Chuck or Holding Flange on the Camlock141
21 Shavings Tank with Spray Protection Wall (Optional)142
- Setting up the Shavings Tank with Spray Protection Wall142
- Mounting the Shavings Tank with Spray Protection Wall on the143
- Drawing and Legend144
22 Coolant System (Optional)145
- Setting up the Coolant System145
- Mounting of the Coolant System to the145
- Safety Regulations for the Handling of Cooling Lubricant146
- Filling the Coolant System147
- Operating the Coolant System Without CNC Control147
- Operating the Coolant System with CNC Control148
- Positioning the Segmented Coolant Hose149
- Controlling the Flow of Coolant Using the Coolant Shut-Off Valve149
- Drawing and Legend150
23 Safety Cabin (Optional)152
- Setting up the Safety Cabin152
- Mounting of the Safety Cabin to the Tool Cabinet (Optional)152
- Safety Regulations for the Handling of Cooling Lubricant153
- Filling the Coolant System Integrated in the Safety Cabin153
- Operating the Coolant System with CNC Control153
- Positioning the Segmented Coolant Hose153
- Controlling the Flow of Coolant Using the Coolant Shut-Off Valve153
- Drawing and Legend154
24 Fixed Bezel (Optional)156
- Operating the Fixed Bezel156
- Drawing and Legend157
25 Moving Bezel (Optional)158
- Operating the Moving Bezel158
- Drawing and Legend159
26 Tensioning Bracket with Milling Machine Table (Optional)160
- Mounting the Tensioning Bracket with Milling Machine Table to the Lathe160
  - Operating Elements161
- Feed Motion of the Milling Machine Table161
- Adjustment of the Dovetail Guide162
- Alignment of the Milling Machine Table162
- Lubrication of the Tensioning Bracket with Milling Machine Table162
- Drawing and Legend163
27 Adjustable Longitudinal Stopper (Optional)165
- Mounting of the Adjustable Longitudinal Stopper165
- Drawing and Legend166
28 Collet Chuck (Optional)167
- Mounting the Collect Chuck167
- Drawing and Legend167
  - Installation and Removal of Collets168

WABECO D6000 - Safety Regulations for the Handling of Cooling Lubricant; Filling the Coolant System Integrated in the Safety Cabin; Operating the Coolant System with CNC Control; Positioning the Segmented Coolant Hose

Table of Contents

Related product manuals