WABECO D6000 - Technical Data for D6000 - D6000 Hs

19
4. Specifications regarding the machine
4.2.1 Technical data for D6000 – D6000 hs
D6000
D6000 hs
Working areas
Distance between centres
600 mm
Centre height
135 mm
Swing diameter via guide
270 mm
Bed width
185 mm
Main drive motor
Nominal voltage
230 V
Nominal frequency
50/60 Hz
Nominal performance of the spindle
motor
1.4 kW 2.0 kW
Spindle revolutions, infinite
30 - 2300 rpm
50 – 5000 rpm
Machine accuracy
Concentricity of the spindle lug
0.005 mm
Cylindrical rotation on 100 mm
overhung
0.01 mm
Cylindrical rotation with simple turning on
300 mm between the centres
0.015 mm
Headstock
Main spindle aperture Ø 20 mm
Taper in main spindle MK3
Main spindle lug According to DIN 6350
Tool skid
Adjustability of the transverse skid 140 mm
Adjustability of the longitudinal skid 60 mm
Longitudinal skid can be swivelled by 360°
Max. turning steel height 20 mm
Tailstock with quick adjustment
Lateral adjustability of the tailstock
upper
± 10 mm
Tailstock sleeve With inner Morse taper MK2
Sleeve adjustability 65 mm
Scale ring read accuracy 0.1 mm
Thread cutting
Tumbler gear drive For left-right thread
2 automatic longitudinal feeds 0.085 and 0.16 mm/revolution
Change gear set for thread cutting Metric 0.25 - 7.0 mm - imperial 10 - 40 G/"