Contents
22.8 Controlling the flow of coolant using the coolant shut-off valve 149
22.9 Drawing and legend 150
23. Safety cabin (optional) 152
23.1 Setting up the safety cabin 152
23.2 Mounting of the safety cabin to the tool cabinet (optional) 152
23.3 Safety regulations for the handling of cooling lubricant 153
23.4 Filling the coolant system integrated in the safety cabin 153
23.5 Operating the coolant system with CNC control 153
23.6 Positioning the segmented coolant hose 153
23.7 Controlling the flow of coolant using the coolant shut-off valve 153
23.8 Drawing and legend 154
24. Fixed bezel (optional) 156
24.1 Operating the fixed bezel 156
24.2 Drawing and legend 157
25. Moving bezel (optional) 158
25.1 Operating the moving bezel 158
25.2 Drawing and legend 159
26. Tensioning bracket with milling machine table (optional) 160
26.1 Mounting the tensioning bracket with milling machine table to the lathe 160
26.2. Operating elements 161
26.3 Feed motion of the milling machine table 161
26.4 Adjustment of the dovetail guide 162
26.5 Alignment of the milling machine table 162
26.6 Lubrication of the tensioning bracket with milling machine table 162
26.7 Drawing and legend 163
27. Adjustable longitudinal stopper (optional) 165
27.1 Mounting of the adjustable longitudinal stopper 165
27.2 Drawing and legend 166
28. Collet chuck (optional) 167
28.1 Mounting the collect chuck 167
28.2 Drawing and legend 167
28.3. Installation and removal of collets 168
To Next Page
Loading...
