Wacker Neuson RC50

Maintenance
Control stand
132
BA RC50_RC70 en 00
4.02.02 Replacing the circulating air filter of the air-conditioning system
1 2 3 1
NOTE
Change the filters according to the amount of dust
accumulated.
Switch off diesel engine and remove ignition key.
Loosen screws [1] and remove with the cover [2] and remove the filter
element [3].
Replace the filter element [3] by a new one.
Mount the cover [2] with the filter element [3] and tighten screws [1].
4.02.03 Replacing the fresh air filter for the driver's cab
3 1 2 1 2 4 1
NOTE
Change the filters according to the amount of dust
accumulated.
NOTE
Check the proper alignment of the filter element (airflow ↑).
Switch off the diesel engine and remove the ignition key.
Undo the screws [1].