Wacker Neuson RC50

Auxiliary equipment
Padfoot shells
BA RC50_RC70 en 00
211
Tightening the bolts on the hose clamp mounting
1
1
2
Tighten the hexagon nut [1] of the hose clamp [2].
Perform this work on the left and right-hand hose clamp mountings.
6.06.04 Removing the padfoot shells
2 3
1
[1] Padfoot shells [2] Clamp connections
[3] Fixing screws
Preparatory work
Park the roller on flat, firm and clean ground.
Thoroughly clean the drum and the padfoot shells.