Operation
Stopping the machine in normal operation
92
BA RC50_RC70 en 00
3.17 Stopping the machine in normal operation
Stopping
Move the drive lever [1] to position 0 and let it engage.
Set the engine speed [3] to idling (MIN).
a
The hydrostatic travel drive brakes until the machine comes to a
standstill.
a
The parking brake has not been activated.
Activating the parking brake
Push the drive lever [1] out of position 0 to the right and into position
P.
a
The drive lever is blocked.
a
The parking brake indicator light [2] lights up: The parking brake is
active.