Wacker Neuson RC50

Operation
Switching the windscreen wiper and washer system on/off
BA RC50_RC70 en 00
83
3.13 Switching the windscreen wiper and washer system on/off
Before starting a journey, check that the windscreen wipers and the
windscreen washer system are working. Check the windscreen washer
system fill level. Top up the windscreen washer system tank if necessary.
I
I
II
0
I
II
0
2 31
[1] Front windscreen wiper switch [2] Front windscreen washer
system switch
[3] Rear windscreen wiper/
windscreen washer system
switch
Push the switch [1] to position I.
a
The front windscreen wiper is now working at stage 1.
Push the switch [1] to position II.
a
The front windscreen wiper is now working at stage 2.
Push the switch [3] to position I.
a
The rear windscreen wiper is now on.
Push the corresponding switch [1] or [3] into position 0.
a
Windscreen wiper off.
Push the switch [2] into position I and hold it there.
a
The front windscreen is wetted when the switch is pressed.
Push the switch [3] into position II and hold it there.
a
The rear windscreen is wetted when the switch is pressed.
Release the corresponding switch [1] or [3] or push it into position 0.
a
Windscreen washer system off.