Description
General view of machine
38
BA RC50_RC70 en 00
MARGIN
Expert inspection test badge
MARGIN
Maintenance overview
10 hrs; daily maintenance
The activities that are shown on the sign must be carried out on a daily
basis before starting up the machine – at least every 10 hours.
The check and maintenance work that is to be carried out may deviate
from what is shown, depending on the model and equipment of the
machine.
This is not an exhaustive representation of the activities. The sections
"Functional checks before starting work" and "Maintenance overview" in
this operating manual are binding and must be followed.
NOTE
The sign is for informational purposes only. It should not and
cannot replace instructions/training from the operator on how to
handle the machine.
To Next Page
Loading...
Need help?
General
