Operation
Important information about operating the machine
BA RC50_RC70 en 00
53
WARNING
Unintended engine start!
Severe injury and death caused in case of an unintended engine start
during testing and adjusting work.
■
Do not carry out any testing and adjusting work unless the engine
has been stopped and the ignition has been switched off.
■
Before starting testing and adjusting work, set the battery isolating
switch to off in order to de-energize the electrical system. As
an alternative, disconnect the earthing/grounding strip from the
battery.
■
To avoid any unintended engine start by any third person, affix
a warning notice at the driver's position indicating that work is in
progress on the machine.
NOTICE
High self-weight of machine!
Material damage under the heavy weight of the machine.
■
When loading and transporting the machine use hoisting gear and
means of transport suitable for the weight of the machine.
■
Use the machine only on sufficient load-bearing soil.
NOTICE
Uncontrolled movements!
Damage to machine or environment by uncontrolled steering system
movements and by consequent front or rear end swings.
■
Applying safety strut before:
■
crane loading the machine.
■
transporting the machine.
■
maintenance and repair work.
To Next Page
Loading...
Need help?
General
