Operation
Loading and transporting
BA RC50_RC70 en 00
63
Specific safety instructions
■
Drive the machine slowly onto/off the loading area using the working
gear and medium speed setting of the diesel engine (ECO or 2/3).
■
Observe maximum permissible ramp slope (28%, approx. 16°).
■
Secure the clamping devices.
■
Check the tyre pressure at least every 24 hours and refill with air, if
necessary (see Technical data).
■
Apply the steering block after loading machine on the means of
transport.
■
Release the steering block before unloading machine from the means
of transport.
Miscellaneous
■
Slot in the seat console, close the cab doors, set down attachments.
■
Completely close and lock the door panes.
To Next Page
Loading...