WAGNER EPG-Sprint X Operating Manual

17
EPG-SPRINT X
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2329371
5 DESCRIPTION
5.1 AREAS OF APPLICATION
The EPG-SPRINT X control unit can be used as a stand-alone unit in manual coating systems
or can be connected to the PrimaTech automatic system together with other units.
When a Corona gun is connected, Corona current scale and the high-voltage supply
and control unit are active.
When a Tribo gun is connected, the Tribo current scale is activated, while the high-
voltage supply and control unit are deactivated.
The control unit recognizes if a manual or automatic spray gun is connected. If an automatic
gun is connected, then the control unit can only be controlled via the CCM Prima interface.
Incorrect use!
Risk of injury and damage to the device.
Only connect original Wagner spray guns to the EPG-SPRINT X
control unit.
The PEM-C3R and PEM-T3R manual spray guns cannot be
connected to the EPG-SPRINT X control unit.
WARNING

WAGNER EPG-Sprint X Specifications

General

Brand	WAGNER
Model	EPG-Sprint X
Category	Control Unit
Language	English