WAGNER EPG-Sprint X Operating Manual

4
EPG-SPRINT X
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2329371
Table of Contents
7 OPERATION 33
7.1 Training the Operating Sta 33
7.2 Safety Instructions 33
7.3 Preparations for Commissioning 35
7.3.1 Operating Modes 35
7.3.2 Gun Recognition 35
7.3.3 Manual Gun Mode with External Control 36
7.3.4 Basic and Factory Settings 36
7.4 Recipes 37
7.4.1 "Double Click" Recipe (High Dynamic Remote) 38
7.5 Air High Output Mode (High Powder Output) 39
7.5.1 Combining the Air Outputs 39
7.5.2 Activating High Output Mode (C17) 40
7.6 Changing and Saving Recipes 43
7.6.1 Recipe No. 1-4 43
7.6.2 Recipe No. 5-50 44
7.7 Setting and Changing Coating Parameters 45
7.7.1 Setting the Total Air Volume 45
7.7.2 Setting the Powder Feed Quantity 46
7.7.3 Setting the Additional Air (Atomizing/Ionizing/Tribo Air Volume) 47
7.7.4 Setting the High-voltage 48
7.7.5 Display of Actual High-voltage Value 49
7.7.6 Setting the Current Limitation 50
7.7.7 Displaying Actual Value of Current Limitation 51
7.7.8 Setting the U/I Characteristics 52
7.8 Purge Function 54
7.8.1 Hose Purge Function 54
7.8.2 Cleaning Purge Function 54
7.8.3 Procedure for Cleaning Purging with Manual Guns 55
7.8.4 Procedure for Cleaning Purging with Automatic Guns 56
7.9 Starting Output Setting (Zero Adjustment) 57
8 CLEANING AND MAINTENANCE 59
8.1 Cleaning 59
8.1.1 Cleaning Sta 59
8.1.2 Safety Instructions 59
8.1.3 Cleaning Procedures 60
8.2 Maintenance 61
8.2.1 Maintenance Sta 61
8.2.2 Safety Instructions 61
8.2.3 Maintenance Procedures 62
9 INSPECTIONS 63
9.1 Inspections in Accordance with DIN EN 50177: 2010 63
9.2 Inspections in Accordance with DIN EN 50050-2: 2014 67
10 DISASSEMBLY AND DISPOSAL 69
10.1 Disassembly 69
10.2 Disposal 70

WAGNER EPG-Sprint X Specifications

General

Brand	WAGNER
Model	EPG-Sprint X
Category	Control Unit
Language	English