34
PEA-C4XL-S
OPERATING MANUAL
VERSION 03/2014 ORDER NUMBER DOC2345334
7.7.1 IMPULSE FLUSHING
If the gun is supplied with coating powder from a powder center, you can initiate an
impulse ushing from there. Further details are contained in the powder center's operating
manual.
Note:
During a paint change, the nozzle system does not necessarily have to disassembled.
Powder supply hose coupling may be hurled around!
Risk of injury and damage to the device.
Check whether the hose is correctly attached to the hose
coupling.
Completely lock the hose coupling and secure it with an O-ring.
WARNING
To Next Page
Loading...
