WAGNER PEA-C4XL-S User Manual

8
PEA-C4XL-S
OPERATING MANUAL
VERSION 03/2014 ORDER NUMBER DOC2345334
2 CORRECT USE
2.1 DEVICE TYPE
Automatic spray gun for automatic coating
2.2 TYPE OF USE
The PEA-C4XL-S spray gun serves as stationary equipment for industrial electrostatic
coating with  ammable powder in automatic systems. It can be operated either with
single control units or switch cabinet modules.
2.3 USE IN POTENTIALLY EXPLOSIVE AREAS
This type A-P electrostatic powder spray gun is suitable for processing industrial powder
paints for coating electrically conductive objects and can be used in potentially explosive
areas (zone 22). (See Chapter 3.1 Explosion Protection Identi cation).
2.4 SAFETY PARAMETERS
The powder spray gun is only suited to the application of powder paint.
J. Wagner AG forbids any other use!
The powder spray gun may only be operated under the following conditions if:
the operating sta have previously been trained on the basis of this operating
manual,
the safety regulations listed in this operating manual are observed,
the operating, maintenance and repair information in this operating manual is
observed,
and the statutory requirements and accident prevention regulations standards in the
country of use are observed.
The spray gun may only be used if all parameters are set and all measurements/safety
checks are carried out correctly.

WAGNER PEA-C4XL-S Specifications

General

Brand	WAGNER
Model	PEA-C4XL-S
Category	Paint Sprayer
Language	English