890362_b•en•21.03.2011 We reserve the right to carry out improvements
31
6.2 Rain monitor
While external venetian blinds and roller shutters are relatively resistant to
precipitation, all fabric products such as articulated arm awnings and con-
servatory awnings must be protected against precipitation. If you have set
any of these awnings in your Quatronic dialog as a product, the precipitation
monitor is automatically set for these as a safety function. If you wish, you
can also enable the precipitation monitor for your external venetian blinds
and roller shutters.
When precipitation (rain, snow, drizzle) falls on the precipitation sensor, the
sun shading products are raised.
The preselected comfort functions and manual operation are locked.
When there is precipitation, the display changes to Position and Cause. The
following message appears for the corresponding facade:
Position: Lower
Upper
Cause: ManOp Rain Rain Rain
Rain in the display stands for rain monitoring.
Once the rain sensor has dried again and the delay set in the sensor has
expired, the preselected comfort functions and manual operation are enabled
again, as indicated by Position = Upper.
The following display appears:
Position: Lower Upper Upper Upper
Cause: ManOp Rain Rain Rain
Safety functions
Rain monitor
To Next Page
Loading...
Need help?
General
