WAREMA Quatronic dialog User Manual

890362_b•en•21.03.2011
We reserve the right to carry out improvements
66
WAREMA Quatronic dialog
®
Operating instructions
9 Help
For most Quatronic dialog displays, there is an integrated help that can be
opened at the touch of a button.
Press the info button.
The first page of the help text appears.
Example Wind ... Dely
Selection of the wind delay UP in
seconds for each channel.
Press the info button again to leaf through the help text.
This delay is required so that brief
exceeding of the wind limit does not
If there are no additional pages, the following message appears:
End of info.
Please press button "disp/prog".
Press the disp/prog button to leave the help.
If you would like to read the text again, press the info button again. The first
page of the help text appears.
NOTE If you stop leafing through the help system for approx. 3 minutes, the help
closes automatically. You will then be located in the display mode.
Help

WAREMA Quatronic dialog Specifications

General

Brand	WAREMA
Model	Quatronic dialog
Category	Control Systems
Language	English