890362_b•en•21.03.2011
We reserve the right to carry out improvements
24
WAREMA Quatronic dialog
®
Operating instructions
5.3 Parameter and setting
menus
Each parameter menu contains the settings (limit values, run times, switching
times, sensor allocations, etc.) of a function group. The following parameter
menus are available:
Safety functions (see Chapter 6 on page 26)
Wind Wind monitoring
Rain Rain monitoring *
Ice Ice monitoring
Comfort functions (see Chapter 7 on page 37)
Sun Sun control
Da/Du Dawn/dusk control
Temp Temperature control
Humidity Humidity control
Clock Time switch control
Auto Comfort timer
General parameters (see Chapter 8 on page 57)
Product Set the type of connected product*
Run time Run time and turn time
Time Time and weekday *
Password Password *
Display Display mode * (see Chapter 5.1.7 on page 22)
* When you select the functions marked with an asterisk, you enter the respec-
tive setting menu directly.
Example Parameter menu for temperature control
Keep the disp/prog button pressed for approx. 5 seconds.
Wind: 8m/s 8m/s 8m/s 8m/s
Time: 10:26:47 Wednesday, 20.11.2008
The selection menu is displayed:
Select the Wind RunT Timer Sun
settings: Rain Temp Product -->
Press the
button below the word Temp.
Menus
Setting menus
To Next Page
Loading...
Need help?
General
