890362_b•en•21.03.2011 We reserve the right to carry out improvements
55
Comfort timer 6:30 OFF OFF OFF
ENABLE Mon-Fri: CH1 CH2 CH3 CH4
The OFF setting is achieved by setting the value to 00:00. The word OFF ap-
pears instead of 00:00. This switches off the comfort timer at the respective
facade.
Leave the menu after completing the entries using the disp/prog button.
This saves the changes you made.
7.6.2 MoFrE, MoFrD, SaSuE,
SaSuD
The sun control, humidity control and temperature control comfort functions
operate independently of the time of day. Thus, they also operate at night.
Using the comfort timer, you can deactivate these functions at any time by
entering the required time period.
(MoFrE, SaSuE)
Using the "Comfort functions ON on a weekday” (MoFrE) and "Comfort func-
tions ON on a weekend” (SaSuE) limit values, you can enter the times during
which the comfort timer should enable the comfort functions.
(MoFrD, SaSuD)
Using the "Comfort functions OFF on a weekday” (MoFrD) and "Comfort func-
tions OFF on a weekend” (SaSuD limit values, you can enter the times during
which the comfort timer should disable the comfort functions.
Dynamic function: dawn,
dusk
The control of the comfort timer via time is rigid. However, you can also con-
trol the comfort timer "dynamically", i.e. using dawn/dusk.
Instead of a time, you can enter Dawn or Dusk. With this setting, the comfort
timer enables the comfort functions at dawn and disables them again at
dusk. This occurs earlier in the summer and later in the winter.
Setting the Dawn value
You obtain the Dawn setting by setting a time of 23:59 in the MoFrE and
SaSuE menu items. Dawn appears instead of the time.
Setting the "Dusk" value
You obtain the Dusk setting by setting a time of 23:59 in the MoFrDand SaSuD
menu items. Dusk appears instead of this time.
Comfort functions
Comfort timer
To Next Page
Loading...
Need help?
General
