890362_b•en•21.03.2011 We reserve the right to carry out improvements
33
6.3 Ice monitor
The ice monitor is another safety function of the Quatronic dialog. It prevents
your sun shading products from being damaged when they are raised and
lowered while the products are frozen. The Quatronic dialog raises the prod-
ucts in cold weather with precipitation before ice is formed in the guide rails.
WARNING
Ice monitoring is deactivated by default.
6.3.1 Switching on/off the ice
monitor
Keep the disp/prog button pressed for approx. 5 seconds.
Wind speed: 8m/s 8m/s 8m/s 8m/s
Time: 10:26:47 Wednesday, 20.11.2008
The selection menu is displayed:
Select the Wind RunT Timer Sun
settings: Rain Temp Product -->
Press the
button under --> to open the second page of the selection
menu.
Select the Displ Ice ComfT Time
settings: Passw Da/Du Rel.H. -->
Press the
button above the word Ice.
The Ice monitoring (ON/OFF) menu is displayed:
Ice monitoring ON OFF OFF OFF
(ON/OFF) CH1 CH2 CH3 CH4
You can use the
buttons to switch the ice monitor on and off at the indi-
vidual facades (F1 - F4).
Leave the menu after completing the entries using the disp/prog button.
This saves the changes you made.
Safety functions
Ice monitor
To Next Page
Loading...
Need help?
General
