WAREMA Quatronic dialog User Manual

890362_b•en•21.03.2011
We reserve the right to carry out improvements
52
WAREMA Quatronic dialog
®
Operating instructions
7.5.1 Switching on the time
switch control
 Keep the disp/prog button pressed for approx. 5 seconds.
Wind speed: 8m/s 8m/s 8m/s 8m/s
Time: 10:26:47 Wednesday, 20.11.2008
 The selection menu is displayed:
Select the Wind RunT Timer Sun
settings: Rain Temp Product -->
 Press the  button above the word Timer.
 The Timer switch menu is displayed.
"Timer switch" stands for time switch control.
Timer switch MoFr  SaSu 
settings: MoFr
 SaSu 
 Select the desired parameter by pressing the  or  button.
Example UP command on a weekday (MoFr  ):
In this menu, you can change the settings for each facade (F1 - F4) using the
 /  buttons.
Timer switch UP  6:30 OFF OFF OFF
Limit UP
 : CH1 CH2 CH3 CH4
The OFF setting is achieved by setting the value to 00:00. The word OFF ap-
pears instead of 00:00. This switches off the time switch control at the re-
spective facade.
 Leave the menu after completing the entries using the disp/prog button.
 This saves the changes you made.
Comfort functions
Time switch control

WAREMA Quatronic dialog Specifications

General

Brand	WAREMA
Model	Quatronic dialog
Category	Control Systems
Language	English