890362_b•en•21.03.2011
We reserve the right to carry out improvements
46
WAREMA Quatronic dialog
®
Operating instructions
Keep the disp/prog button pressed for approx. 5 seconds.
Wind speed: 8m/s 8m/s 8m/s 8m/s
Time: 10:26:47 Wednesday, 20.11.2008
The selection menu is displayed:
Select the Wind RunT Timer Sun
settings: Rain Temp Product -->
Press the
button below the word Temp.
The Temperature menu opens.
Temperature Out
In
InOM
control settings: Out
In
OutOM Alloc
Select the desired parameter by pressing the
or
button.
Example Outside temperature limit value for the up command
In this menu, you can change the settings for each facade (F1 - F4) using the
/
buttons.
Temp. outside OFF OFF OFF OFF
Limit
: CH1 CH2 CH3 CH4
The OFF setting is achieved by setting the value to -25°C or to 75°C. The
word OFF appears instead of these numbers. This switches off the tempera-
ture control at the respective facade.
Leave the menu after completing the entries using the disp/prog button.
This saves the changes you made.
Comfort functions
Temperature control
To Next Page
Loading...
Need help?
General
