109
Programme unit
RAPID ADVANCE ALLOWED Y
SHOW WEIGHT ALLOWED Y
WATER REDUCTION NOT ALLOWED Y
MANUAL FUNCTIONS ALLOWED Y
PAUSE ALLOWED Y
FREE TEXT ALLOWED Y
CHANGE WASH PROGRAM ALLOWED Y
AUTO RESTART ALLOWED Y
ADJUST SPIN SPEED ALLOWED. Y
DISPLAY REMAINING TIME Y
DISPLAY ACTUAL TEMPERATURE Y
DISPLAY ACTUAL SPEED Y
MACHINE NOT HEATED N
TEMPERATURE CONTROL OF WATER Y
Y/N
Y/N
Altering extraction speed allowed
Here you determine whether it is allowed to alter
the extraction speed during the current extraction
sequence by using to move to the DRUM
SPEED line and entering a new value.
PROGRAM STEP: EXTRACT 1
STEP TIME: 300 SEC
REMAINING TIME: 56 MIN
DRUM SPEED: 800 RPM
RAPID ADVANCE
SHOW WEIGHT
SELECT
991 NORMAL 95°C STD
If you answer Yes (Y):
Altering extraction speed will be allowed.
If you answer No (N):
Altering extraction speed will not be allowed.
991 NORMAL 95°C STD
Display time left
Here you determine whether the time the program
has left to run will be displayed during the pro-
gram. This function will not work until the second
time the program is run. Before that the line will be
blank even if you have inserted Y (Yes) here.
The time displayed will be based on the average of
the last five times the program was used.
PROGRAM STEP: MAIN WASH 1
STEP TIME: 720 SEC
SET TEMPERATURE: 85 °C
ACTUAL TEMPERATURE: 21 °C
REMAINING TIME: 70 MIN
DRUM SPEED: 48 RPM
CHANGE °F/°C
AUTO RESTART
SELECT
If you answer Yes (Y):
The time the program has left to run will be dis-
played.
If you answer No (N):
The time the program has left to run will not be
displayed.
Answer Yes (Y) or No (N)..
Press .
Answer Yes (Y) or No (N)..
Press .
MANUAL FUNCTIONS ALLOWED Y
PAUSE ALLOWED Y
FREE TEXT ALLOWED Y
CHANGE WASH PROGRAM ALLOWED Y
AUTO RESTART ALLOWED Y
ADJUST SPIN SPEED ALLOWED. Y
DISPLAY REMAINING TIME Y
DISPLAY ACTUAL TEMPERATURE Y
DISPLAY ACTUAL SPEED Y
MACHINE NOT HEATED N
TEMPERATURE CONTROL OF WATER Y
TEMPERATURE IN °C Y
REPEAT PROGR. MODE QUESTION N
LOCKED STANDARD WASH PROGRAMS N
LEVELQUICKCOOL-DOWN 175
To Next Page
Loading...
