Wascomat Clarus Control SU620 - Weight from Scale

49
Troubleshooting
WEIGHT FROM SCALE
The scale is all the time sending the actual weight to the timer. If the scale
isover-orunder-loadedallthetimetheerrorwillbeindicated.
The same error will also be indicated if the weight transfered from the scale
to the timer at the beginning of a water filling periode, is above a certain li-
mit set in the configuration system of the machine. To correct the problem,
trytorstzerocalibratethescaleandthenresetthescaleintheservice-
mode. If the error remains, please contact service.