Wascomat Clarus Control SU620 - To Replace the CPU Board

154
Programme unit
To replace the CPU board
If the CPU board is faulty and has to be replaced. The correct software for
the particular washer extractor has to be downloaded into the new timer.
For this you need:
1. A new CPU circuit board.
2. A PC service tool (ELS CST), including downloading cables.
3. APCwhichcorrespondstosystemrequirementsforthePC-tool.
4. Software which is correct for the model of washer extractor the CPU
board is to be installed in, to be downloaded into that CPU board.
Instructions:
• LatestavailablesoftwareisalwaysavailablebyorderingtheCD-rom
(Part No. 438 713099) or for download on ELS Homepage.
If possible it is recommended to get software from ELS Homepage
(login could be required).
• AcompletekitforELSCommonServiceTool(ELSCST)including
PC software and downloading cables can be ordered (Part No.
988 802255). This is required.
• ForsystemrequirementsonPC,pleaserefertoproductdatasheetfor
ELS Common Service Tool. This is available on ELS Homepage.
• LaunchELSCSTandopenthesoftwareyouwanttoupload.Followon
screen instructions. By pressing F1 (Help) instructions how to connect
to the CPU is available.