Wascomat Clarus Control SU620 - Settings 1

99
Programme unit
Settings 1
In the Configuration 1 mode, the variables can be changed without
requesting a special password from the supplier:
ADJUST TIME ALLOWED
ADJUST TEMPERATURE ALLOWED
RAPID ADVANCE ALLOWED
SHOW WEIGHT ALLOWED
WATER REDUCTION NOT ALLOWED
MANUAL FUNCTIONS ALLOWED
PAUSE ALLOWED
FREE TEXT ALLOWED
CHANGE WASH PROGRAM ALLOWED
AUTO RESTART ALLOWED
ADJUST SPIN SPEED ALLOWED
DISPLAY REMAINING TIME
DISPLAY ACTUAL TEMPERATURE
DISPLAY ACTUAL SPEED
MACHINE NOT HEATED
TEMPERATURE CONTROL OF WATER
TEMPERATURE IN °C
REPEAT PROGR. MODE QUESTION
LOCKED STANDARD WASH PROGRAMS
LEVELQUICKCOOL-DOWN
LEVEL UNBALANCE
LEVEL LOW
LEVEL MEDIUM
LEVEL HIGH
MIDDELTEMPERATURECOOL-DOWN
DEFAULT MOTOR ON TIME
DEFAULT MOTOR OFF TIME
FLUSH DELAY TIME
FLUSH ON TIME
BUZZER ON BUTTON
MAX FILLING TIME
MAX HEATING TIME
SHOW WEIGHT TIMEOUT
PC5 BLOCKING OF HEATING
PC5 BLOCKING OF SPINNING
HEAT 2 AS STANDARD
SERVICE ALARM HOURS
BUZZER TIMEOUT AT END
BUZZER TIMEOUT AT PAUS
ERROR, OVERFILLED
PASSWORD ACTIVE
CMIS ADDRESS
LEVEL IN MM ACTIVE
START SLOW FILLING, HG
OFFSET LEVEL, HG
READY