Wascomat Clarus Control SU620 - Service Programme

30
Troubleshooting
Press b four times.
... to highlight
”SERVICE PROGRAM”.
RUN A WASH PROGRAM
GO TO THE MENU
MAKE YOUR CHOICE WITH
OR AND PRESS SELECT
WEIGHT, KG 000,0
SELECT
SELECT
MENU
MAKE A CHOICE:
WASH PROGRAM LIBRARY
PROGRAMMING MODE
SETTINGS 1
MEMORY CARD
SERVICE MODE
STATISTICS
WASH PROGRAM LIBRARY
PROGRAMMING MODE
SETTINGS 1
MEMORY CARD
SERVICE MODE
STATISTICS
MANUAL MODE
SETTINGS 2
EXIT
SELECT
SELECT
RUN A WASH PROGRAM
GO TO THE MENU
If this menu is not currently
displayed:
Press repeatedly.
Press to highlight
”GO TO THE MENU”.
Press SELECT.
Press SELECT.
The service program
 Theserviceprogrammakesfault-ndingonthe
machine easier, as it allows you to control the
various machine functions individually:
 • waterlling
 • detergentushing
 • motorrotation,clockwiseandcounterclockwise
 • motoraction,distributionandextraction
 • drain
 • doorlock
 • heating
 • buzzer
You can also check which input signals to the
PCU are activated:
 • emergencystop
 • remotestart
 • oillubrication
 • service
 • repeatrinse
 • phasecheck
 • doorlocked
 • doorclosed
 • imbalance
The following values will also be displayed at all
times:
 • waterlevelinmachine
 • watertemperature
 • motorspeed
 • whetherdrainisopenorclosed
Service programme
Opening the service programme