Wascomat Clarus Control SU620 - Page 120

120
Programme unit
BUZZER TIMEOUT AT END 0:20
1 2 3
4 5 6
7 8 9
0
Buzzer length at programme end
Hereyoudetermineforhowlongthebuzzer
should sound at the end of the programme unless
it is not turned off manually.
When programming the main data for a washing
programme, it is possible to select whether or not
tosoundthebuzzerattheprogrammeend.The
buzzerisswitchedoffbypressingafunctionbut-
ton on the control panel.
BUZZER TIMEOUT AT PAUS 0:10
1 2 3
4 5 6
7 8 9
0
Buzzer length at pause
Hereyoudetermineforhowlongthebuzzer
should sound at a programmed pause unless it is
not turned off manually.
When programming a washing programme, it is
possible to select whether or not to pause and
soundthebuzzerforeachwashingmodulebefore
thatmodulestarts.Thebuzzerisswitchedoffby
pressing a function button on the control panel.
Use the numeric keys to
enter the value.
If you make a mistake while
entering digits:
Press ERASE.
When you have finished:
Press .
Use the numeric keys to
enter the value.
If you make a mistake while
entering digits:
Press ERASE.
When you have finished:
Press .