Wascomat Clarus Control SU620 - Page 151

151
Programme unit
Max level offs. for aut. calib.
Maximum level in SKD for automatic calibration.
START EXTRACT SPEED 1000
DEFAULT WASH ACCELERATION 20
DISTRIBUTION ACCELERATION 9
RETERDATION ACCELERATION
EXTRACT ACCELERATION 40
START EXTRACT ACCELERATION 40
EXTRACT RETARDATION 50
MAX SPEED DURING FILLING 100
MAX LEVEL OFFS. FOR AUT. CALIB.
TIME AT DISTRIBUTION SPEED 2
NUMBER OF REDIST LOW 1 UNB.
NUMBER OF REDIST LOW 2 UNB.
NUMBER OF REDIST MEDIUM UNB.
NUMBER OF REDIST HIGH UNB.
NUMBER OF REDIST EXTREME UNB.
DRAIN TIME AT PROGR. START
DRAIN TIME AT PROGR. END
READY
1 2 3
4 5 6
7 8 9
0
Use the numeric keys to
enter the value.
If you make a mistake while
entering digits:
Press ERASE.
When you have finished:
Press .
Drain time at progr. start
Drain time at program start after that the level is
below level empty.
START EXTRACT SPEED 1000
DEFAULT WASH ACCELERATION 20
DISTRIBUTION ACCELERATION 9
RETARDATION ACCEL
EXTRACT ACCELERATION 40
START EXTRACT ACCELERATION 40
EXTRACT RETARDATION 50
MAX SPEED DURING FILLING 100
MAX LEVEL OFFS. FOR AUT. CALIB.
TIME AT DISTRIBUTION SPEED 2
NUMBER OF REDIST LOW 1 UNB.
NUMBER OF REDIST LOW 2 UNB.
NUMBER OF REDIST MEDIUM UNB.
NUMBER OF REDIST HIGH UNB.
NUMBER OF REDIST EXTREME UNB.
DRAIN TIME AT PROGR. START
DRAIN TIME AT PROGR. END
READY
1 2 3
4 5 6
7 8 9
0
Use the numeric keys to
enter the value.
If you make a mistake while
entering digits:
Press ERASE.
When you have finished:
Press .