Wascomat Clarus Control SU620 - Page 188

188
Regular maintenance
- Verifythatallinternalhosesdonotleak.
- Inspectthedrivebelt.Adjustthetensionorreplaceifnecessary.
- Checkthatwaterdoesnotleakontotheoor.
- Iftheheatingtimeisunusuallylong,checktheheatingelements.If
the water is very hard, check whether there are lime deposits on the
heating elements. Decalcify the elements if necessary. Adapt the
amount of deliming agent to the manufacturer’s guidelines.
- Neverswitchontheheatingelementswhenthereisnowaterinthe
machine.Thiswillcausetheslow-blowfusetotrigger.
- Inspecttheshockabsorbersandcoilsprings.